Fi-Clor Maxi-Tabs 2.4, 5 & 10kg Fi-Clor Maxi-Tabs are designed to slowly release a safe but highly concentrated level of available chlorine over a period of several days to combat bacteria and other pollutants. They contain a built-in stabiliser making them particularly effective in outdoor pools where chlorine loss to sunlight can be a problem. DO NOT MIX WITH OTHER PRODUCTS. DO NOT DISSOLVE BEFORE USE. Instructions 1 Calculate the volume of water in your pool (if in doubt, consult the Fi-Clor Swimming Pool Handbook). 2 Remove plastic wrapping and place the required number of Maxi-Tabs in a floating dispenser or tablet feeder. 3 School, hotel or public pool feeder requirements will vary, depending on water capacity, water temperature, flow rate and number of bathers. Adjust dosage to maintain correct free chlorine readings. 4 Every 1-2 weeks and especially during periods of heavy use, raise the chlorine level to at least 5mg/l (ppm) using Superfast Granules. Warning: Do not use together with other products. May release dangerous Warning gases (chlorine). Precautions – Never mix in their solid state, or in concentrated solution, Fi-Clor BLUE and RED label products > Never mix chemicals except by dosing into the pool separately and at different times. >  Never add chemicals to the water when bathers are in the pool. >  Store in a cool, dry, well ventilated, secure place away from oxidising and reducing agents; petrol, oil, solvents and organic materials; ammonia, fertiliser and nitrogen compounds; strong acids and alkalis. >  Avoid direct contact with pool chemicals. Should there be skin contact with chemicals, wash thoroughly.
© Fi-Clor 2012 website by Williams Advertising & Design